CUSTOM MED-ALERT SECURITY
COMMUNICATIONS & CONTROLS
Nurse Assistance Custom Nurse Assistance
Factory assembled and tested - custom Nurse Assistance control electronics packages are designed for use with logic and a hardwired type custom control panel or touch screen. Two methods of operation are available, CUSTOM VISUAL and CUSTOM AUDIO-VISUAL.
Options: 1. Code Blue Station
Additional Information
TSSF-2N
Nurse Call Tamperproof Staff Station, 2 Device Cover Mount
Based upon Secure-Tech's TSS-2 intercom station, the "N" Nurse Call intercom station is designed for use in the highest security areas. It is suited for both interior and exterior wall mount applications. Electronic devices are not installed in the station housing. Additional Information (PDF)
Models:
TSSF-2/11 - 45 ohm speaker
TSSF-2/11T - 8 ohm speaker with 25 volt transformer
TSSF2-2/11 - Two call-in - 45 ohm speaker
TSSF2-2/11T - Two call-in 8 ohm speaker with 25 volt transformer
TSX - Without push button
16 gauge faceplate available.
Accessory:
TBB-2/14 - Weatherproof surface mount backbox, no knockouts, 14 gauge CRS, painted flat black, 5.25" (133.3mm) square x 3.0" (72.4mm) D.
Additional Information
TSS-1N
Nurse Call Tamperproof Staff Station, Jam Mount
Based upon Secure-Tech's TSS-1 intercom station, the "N" Nurse Call intercom station is designed for use in the highest security areas. Its reduced width makes it suited for installation in security hollow metal door frames and /or window frames. Electronic devices are not installed in the station housing.
Models:
TSS-1 - 45 ohm speaker
TSS-1-T - 8 ohm speaker with 25 volt transformer
Additional Information
TPB - TPH - TPK Series
STAINLESS STEEL PUSH BUTTON - KEY SWITCH
GENERAL OPTIONS:
Etech Stainless Steel Plates and Switches are available with custom engraving, 3-position keyswitches (many models), key removal options, rounded plate corners and additional switches and/or LED's - Please call to discuss your project's needs.
PART # CROSS REFERENCE: TSPB-1/11, TSPB-1/16, TSPB-2/11, TSPB-2/16, N-TPB-1/11, N-TPB-1/16, N-TPB-2/11, N-TPB-2/16, STLC-TPB-1/11,
STLC-TPB-1/16, STLC-TPB-2/11, STLC-TPB-2/16
Additional Information
TPM Series
MUSHROOM SWITCH FEATURES:
Specifications:
Listings: UL508; CE; UL File E131568. CSA certified class 3211 03, LR 68551.
NEMA ICS5-2000: A600, Q600 . IEC 60947-5-1: AC15, DC13.
Environmental: IP65, IP66 ratings to IEC 529 Silver Contacts for high reliability.
1 N.O. and 1 N.C. contacts standard. Some switch/action combinations my not be available. Mechanical Life:
• Momentary: 5 million operations
• Maintained: 300,000 operations
Additional Information
CUSTOM STAFF STATIONS
Local Controller Custom Stations
The tamperproof reset stations are designed for use in the highest security areas. Suited for both interior and exterior wall mount applications, annunciation, including nurse call (patient call-in and toilet/shower) staff duress, etc. Electronic devices may be installed in the station housing.
Additional Information
MASTER INTERCOM STATION
Custom Stations
The audio tamperproof control reset station is designed for use in the highest security areas. Suited for both interior and exterior wall mount applications, annunciation, including nurse call (patient call-in and toilet/shower) staff duress, etc. Electronic devices may be installed in the station housing.
Additional Information
HC-0682
Nurse Call System Controller
As a Nurse-Call Controller - 512 inputs and 512 outputs may be connected to each HC-0682 module by HC-0714-32 Input and HC-0715-32 Output modules. Other typical usage - control o intercoms, doors, duress, fire alarm annunciation, etc. Communication method - RS-485, program method - "C". Partial self-diagnostic, a flashing green LED and a standby (off) yellow LED indicates normal operation. Other indication combinations identify various possible errors.
Additional Information
HC-0850 / HC-0851
48 Inputs / 48 Outputs
The HC-851 provides a communications interface for FORTY-EIGHT OPTO-ISOLATED inputs into the HC-0682 System Controller.
Additional Information
HC-0826
Intercom Amplifier
The HC-0826 is a high quality, reliable, long life intercom amplifier, for use with the HC-0644, HC-0845, and HC-0846 intercom selectors. The amplifier is suitable for the high frequency use typically found in detention facility applications.
The inputs and outputs are connected to Phoenix type compression screw terminal plugs sized for 28 or 16 AWG stranded conductors.
Additional Information
HC-0846
PLC 8 Station Intercom Selector
The HC-0846 provides the inputs and outputs for up to eight intercom stations or paging zones, for operation by a programmable logic controller, with access to two different audio busses. It interfaces with all major manufacturers' PLCs and the HC-0682 System Controller.
Models:
HC-0846-12-M - 12 VDC, Molex (motherboard)
HC-0846-24-M - 24 VDC, Molex (motherboard)
HC-0846-12-P - 12 VDC, Phoenix (no sound alarm)
HC-0846-24-P - 24 VDC, Phoenix (no sound alarm)
Additional Information
JUST-TALK
Duplex Talk Through Communicator
The JUST-TALK Duplex Talk Through Communicator is designed for visitation booths, control room to corridor, and other applications requiring communications through a security glass partition or wall. The system consists of a pair of identical units, typically one on either side of a viewing window or wall. Providing full duplex two-way communication without feedback. Each pair of units is tuned to the installed location environment. The result is very natural hands free communication.
Additional Information JUST TALK HANDSET ADA COMPLIANT (PDF)
Additional Information
Additional Information Technical Details
Control Panel Part
Pushbuttons - LED
Tamper Resistant Stainless Steel Pushbutton
STLC-TPB-037 Marine grade stainless steel, low profile, panel displacement .875" diameter. Contact rating 1A @ 50 volt, screw terminals, front panel sealed to IEC Specification IP68, (with LED, IP66)* SPST. Available with imbedded 2VDC LEDs. If replacing AML21 or AML22, use round bezel to cover the four corners of a the square opening.